Electrical Insulating Mats


  • NC10KV Electrical Insulating Mats
  • NC20KV Electrical Insulating Mats
  • NC30KV Electrical Insulating Mats
  • NC50KV Electrical Insulating Mats

Electrical Insulation Mat • Insulating Mats • Electrical Rubber Mat • Electrical Switchboard Matting •
Non Conductive Switchboard Mat • Switchboard Rubber Mat • Corrugated Switchboard Mats •
Diamond Plate Switchboard Mats • High Voltage Insulation Rubber Mat • Electrical Safety Matting •
Switchboard Matting • Substation Rubber Mat • Non Conductive Mat • Dielectric Rubber Mat • Switchgear Matting


~   Roll Form

Insulating Mat – Ecoformat

Ecoformat – NC10KV/NC20KV/NC30KV/NC50KV Electrical Insulation Mat ( Corrugated Switchboard Mats /
Diamond Plate Switchboard Mats / Non Conductive Switchboard Mat ) was test under by TNB Labs Sdn Bhd & SGS,
complied and passed under below requirement.

1) IEC 61111:2009 - Cert. No: TNBR/HVLT-2019-08/001 For NC10KV Electrical Insulating Mats Class 0 Withstand Voltage (10kV)
2) IEC 61111:2009 - Cert. No: TNBR/HVLT-2019-10/006 For NC20KV Electrical Insulating Mats Class 1 Withstand Voltage (20kV)
3) IEC 61111:2009 - Cert. No: TNBR/HVLT-2019-09/001 For NC30KV Electrical Insulating Mats Class 2 Withstand Voltage (30kV)
4) IEC 61111:2009 - Cert. No: TNBR/HVLT-2019-09/002 For NC50KV Electrical Insulating Mats Class 4 Withstand Voltage (50kV)

* SGS is the world's leading inspection, verification, testing and certification company.
  SGS recognized as the global benchmark for quality and integrity.
1) ASTM D635-14 Flammability Test - This product pass the flammability (Horizontal Burning)

           Not spreading fire when ignited or under high temperature.

           Certificate No: SZIN1908011494PS

  • Switchboard Rubber Mat are manufactured as per the latest IEC 61111:2009 Live Working standard.
  • Electrical Switchboard Matting are used as floor coverings in areas of high voltage applications for the safety of users from dangerous electrical shock.    
  • Substation Rubber Mat are flame-retardant.    
  • Most of these Electrical Safety Matting have an anti-slip surface.    
Model No. Size Color Surface Design Matting Class IEC 61111:
2009 Withstand Voltage
Dielectric Test Voltage Nominal Maximum Use Voltage
(Low Voltage)
5mm x 1m x 10m Black Diamond Plate Class 0 10,000 V 1,000 V AC
NC20KV 9mm x 1m x 6m Black Corrugated Class 1 20,000 V 7,500 V AC
NC30KV 8mm x 1m x 6m Grey Corrugated Class 2 30,000 V 17,000 V AC
NC50KV 12mm x 1m x 6m Grey Plain Class 4 50,000 V 36,000 V AC

Material Type: Natural Rubber ( NR, SBR )
Specific Gravity: ± 1.6g/cm3
Hardness: 65 ± 5 Shore-A
Elongation: ± 280%
Tensile Strength: ± 4 Mpa

 Inquiry - Electrical Insulating Mats